11
9. Manual Override Operation
Permanent OFF
• Flick the isolation switch to the OFF position.
Pulse Manual Override Mode– For the light
to turn ON
• Flick the isolation switch at day or night, OFF/ON twice within 2.5
seconds. The PIR will then be set to activate your lamp the same night.
• The unit will illuminate continuously until dawn, or until the unit is
switched back into auto mode.
Note: The Pulse Manual Override will only operate for 1 night, then after
will revert back to auto mode.
2.5 SEC
x2
• To manually return to Auto Mode, flick the isolation switch OFF/ON once
within 1.5 seconds.
