10
6.6 Repeat steps 6.1 through to 6.5, to set the
remainder 6 programmed ON/OFF times
and day(s) as required. Just another reminder,
that any unused programmes must be left
blank. Do not program any ‘0’s into unused
programmes. You can bypass the remaining
programmes by pressing and holding the
‘PROGRAM’ button until the display shows
the normal operating mode (current time),
or by leaving the device untouched for more
than 1 minute in which case the unit
will ‘time-out’ and return to normal
operating mode automatically.
IMPORTANT: After setting a clock time which falls
within a programmed ON period, the unit will
not automatically switch ON. Press the ‘CHANGE’
button once to turn the ETU17N ON (the ON will
flash to indicate you have manually overridden
the unit). After this the unit will operate normally
to the program you have set.
