Full Technical specification available upon request. Contact [email protected] for PDF.
Ambient RGB LED Lighting Controller
With Remote
Cleaning:
• Do not use any chemical or abrasive cleaners.
• Clean product with a soft, dry cloth.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 1 year from the date of
purchase (conditions apply, please see TIME LED website for further details). If a suspected fault should develop in this
time, please contact us via the address on the front.
Recycling Advice:
Waste Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Product Code
781302
Driver Size
Remote Size
49x21x36
84x51x7
Cable Length
13cm
Voltage
12-24V
Working Temperature
-20 to +60°C
Maximum Wattage
72W (12V)
144W (24V)
Max Load
2A for each colour
Lifespan
7500 Hours
Material
PC
IP Rating
IP20
Warranty
1 Year
1.Specifications:
Operation Instructions of Controller
Working temperature: -20-60C
RC.size:84x51X7mm
Supply voltage: DC12V
Connecting Mode: Common anode
Adopt IR remoter to control the led controiler ,which has 24 buttons,the function of each button as the table below:
II. Control Method:
Output: Three CMOS drain-open output
Max load current: 2 A each color
III. Panel specification and connecting drawing as follows:
IV. Warning:
1. Supply vlotage of this product is DC12~24V never connect AC220V.
2. Never connect two wires directly in case of short circuit.
3. Lead wire should be connected correctly according to colors that connecting diagram offers.
4. Warranty of this product is one year, in this period we guarantee replace ment or repairing with no charge, but
exclude the artif:cial situation of damaged or overload working.
Brig (Speed up) Brightness - (Speed down)
Off
On
Static red
Static orange
Static dark yellow
Static yellow
Static straw yellow
Static green
Static Pea green
Static cyan
Static light blue
Static sky blue
Static green
Static Pea green
Static cyan
Static light blue
Static sky blue
Static white
7 color jumpy change
All fade out&fade in
7color fade change
3 base colr jumpy
DC12~24V
POWER
SIGNAL
IR Sensor
OUTPUT
G
G
R R
B
B
IR.size:60x35x21mm
Remote Interface:
Installation:
FLASH
W
ON
B
OFF
G
R
STROBE
FADE
SMOOTH
Mode Settings
Power On
Power Off
Brightness
Adjustments
Red Hue Variations
White Colour Temperature
Green Hue Variations
Blue Hue Variations
• Supply voltage of this product is DC12~24V DO NOT connect AC220V.
• Never connect two wires directly in case of short circuit.
• The lead wire should be connected according to the above the diagram.
DC 12V OR DC 24V
