Full Technical specification available upon request. Contact [email protected] for PDF.
Ambient 100W LED 24V IP67 Driver
Cleaning:
• Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the driver.
Warning:
• This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing.
Irreparable damage will occur if this instruction is not followed.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 2 years from the date of
purchase (conditions apply, please see TIME LED website for further details). If a suspected fault should develop in this
time, please contact us via the address on the front.
Recycling Advice:
Waste Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Product Code
781289
Size (mm)
187x36x63
Watts
100W
Input Frequency
50Hz
Voltage
170-265V
Hertz
50Hz
Current
4.16A
Power
100W
Power Factor (PF)
0.9
Material
Aluminum
IP Rating
IP67
Warranty
2 Years
Installation:
• Provide power to the required point of installation. Suitable IP rated junction boxes should be used where required.
• Find a suitable location which there will be adequate air space around the product.
• Connect the Live (brown), Neutral (blue) and Earth (yellow/green) to the primary side of the driver.
• Connect the secondary side of the driver to the LED load, using appropriate connectors.
• Switch on power supply and check for correct operation.
