2
Introduction
The TG232W uses a magnetically operated sensor
to detect doors and windows being opened. It has
two selectable sounder modes – alarm and chime.
The high output alarm (105dB) is useful when you
wish to deter intruder entry and the chime mode
can be used when you wish to be informed of
movements at entry points or within the building.
Battery Installation/Change
Move slide switch (see fig 1) to off. Press down on
the raised arrow head on the battery cover and
slide the cover in the direction of the arrow
removing it from the alarm unit. Remove the
battery connector from the old battery if necessary
and push it onto the new battery. Slide the battery
cover back into position.
TG232W_Instructions.qxd 2/5/06 4:17 pm Page
