RadarVision 2
User’s Guide
Preliminary
Sheetrock
Brick
Wood and wood composites
Plaster
Tile
Fiberglass
This manual will explain the basic features and functions of the device, describe the controls
and options, provide tips for operation and give troubleshooting assistance.
Figures 2.1
and
2.2
show the RV 2 from the operator’s side of the unit. The device is
activated with a single Power On/Off [red] button. The green buttons aligned below and to
either side of the display screen control other radar and display functions. When powered on
the display screen shows objects detected by the radar. The auxiliary connector is used to
perform diagnostics and software updates at the manufacturer, see
Appendix A
.
2.1 Overview of
Controls
The RV 2 powers up in scanning mode as shown in
Figure 2.2
. Button function descriptions
appear in blue text on white bars. The unit must be powered on to view the menu function
bars on the display screen. Each green function control button selects options for a
corresponding function bar. The outermost, middle, and innermost control buttons operate
the outermost, middle, and innermost display function bars respectively. Depress the
corresponding green button to select an operation parameter. Options displayed on the six
menu function bars may vary as you navigate the menu.
Button
Function
Descriptions
Menu Function Bars
[White/Blue Text]
Control
Buttons
[Green]
Figure 2.2: Display and Function Control Buttons
Page 10
