Timberwolf TW PTO/S426, Инструкция по эксплуатации

Страница: 9 / 49

DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
DAMAGE IS
LIKELY
BRICKS STRING ROOTS BEDDING
PLANTS
STONES METAL GLASS RUBBER
CLOTH PLASTIC
Do not smoke when refuelling.
Do not let anyone who has not received
instruction operate the machine.
Do not climb on the machine at any time.
Do not handle material that is partially engaged in the
machine.
Do not touch any exposed wiring while machine is running.
Do not use the chipper inside buildings.
TW PTO S426
6 / 45
SAFE WORKING
24.06.2019
ü
GENERAL SAFETY MATTERS
DO’S AND DON’TS
Do not operate chipper unless available light is sufficient
to see clearly.
Do not attempt to engage PTO without the feed funnel,
belt guard, guards and discharge unit securely in place.
Do not stand directly in front of the feed
funnel when using the chipper. Stand to
one side.
Always stop the tractor engine, remove ignition key and
disconnect the PTO shaft before making any adjustments.
Always check machine has stopped rotating and remove
tractor ignition key before maintenance of any kind, or
whenever the machine is to be left unattended.
Always check machine is securely coupled to tractor pin
hitch and on firm level ground.
Always run tractor engine at required speed to acheive
correct PTO speed.
Always check (visually) for fluid leaks.
Always take regular breaks. Wearing personal protective
equipment for long periods can be tiring and hot.
Always keep hands, feet and clothing out of feed opening,
discharge and moving parts.
Always use the next piece of material or a push stick to
push in short pieces. Under no circumstances should you
reach into the funnel.
Always keep the operating area clear of people, animals
and children.
Always keep the operating area clear from debris build up.
Always keep clear of the chip discharge tube. Foreign
objects may be ejected with great force.
Always ensure protective guarding is in place before
commencing work. Failure to do so may result in personal
injury or loss of life.
Always operate the chipper in a well ventilated area -
exhaust fumes are dangerous.
ü