Timberwolf TW 280FTR (Petrol), Инструкция по эксплуатации

Страница: 38 / 68

5.2 Routine Servicing
Before carrying out any servicing, always ensure the chipper is in a safe condition.
(Refer to Section 5.1 "
Safe Maintenance" on page 35.)
To ensure that your TW 280FTR is always maintained in good working order, checks
should be carried out at the specified intervals.
Daily servicing is detailed within this manual. (Refer to Section 5.2.1 " Daily Servicing" on
page 36.)
A series of checks to be carried out at more extended intervals are detailed within the
'Service and Warranty' document.
5.2.1 Daily Servicing
The following checks should be carried out every day:
• Check coolant level.
• Check radiator is clear.
• Check hydraulic oil level - top up if necessary. (Refer to Section 4.16 " Check Hydraulic
Oil Level" on page 32.)
• Check engine oil - top up if necessary.
• Check for engine oil / hydraulic leaks. (Refer to Section 5.13 " Check Hoses" on page
46.)
• Check fuel level. (Refer to Section 4.18 " Check Fuel Level and Refuel" on page 33.)
• Check feed funnel, feed roller cover, access covers, engine covers and discharge unit
are securely fitted.
• Check blades and change if necessary. (Refer to Section 4.15 " Blade Wear" on page
31 and Section 5.8 "
Change Blades" on page 41.)
• Clean air filter element (Depending on working environment).
• Check safety bar mechanism.
• Check for tightness: all nuts, bolts and fastening. Ensure nothing has worked loose.
(Refer to Section 5.7 "
Check and Replace Fasteners" on page 40.)
• Grease the roller box slides. (Refer to Section 5.15 " Grease the Roller Box Slides" on
page 47.)
• Grease the roller splines and bearings. (Refer to Section 5.16 " Grease the Roller
Splines and Rotor Bearings" on page 48.)
• Check the rubber tracks for any signs of damage. (Refer to Section 5.19.2 " Checking
the Rubber Tracks" on page 51.)
• Check the track tension. (Refer to Section 5.19.1 " Checking Track Tension" on page
50.)
36/66 C190-0308 - Rev 1.0 EN
TW 280FTR (Petrol) 5 Maintenance Instructions