84
The TimberTech DeckLites LED system is designed for use with the RadianceRail, RadianceRail Express and Ornamental Rail products.
Below is a sample lighting layout showing fixture placement and wiring routes. When laying out the wiring for your deck, keep the following in mind:
Building codes vary by locale, please consult all applicable codes
before beginning project.
Modifications must be made to railing components during assembly to
accommodate wiring and fixtures. Do not begin deck construction until
you have read the lighting instructions.
A maximum of 40W can be appliced to a single circuit. The maximum
recommended load for the transformer is 90 watts. Please refer to chart
below to determine that wattage of each fixture.
The 16AWG secondary supply wire can be
buried to a maximum of 6”
for
routing under deck or other obstacles. The Luminary (unit secondary)
wires cannot be buried underground.
Luminaries shall not be installed within 10 feet (1.52m) of a pool, spa or
fountain.
This unit secondary wiring shall be protected by routing in close
proximity to the luminaire or fitting, or next to a building structure
such as a house or deck. The wiring shall not be buried except for a
maximum 6 inches (15.2cm) in order to connect to the main
secondary wire.
Trim post covers to correct length - see Post and Rail Prep page.
Post Cap Light
Transformer
Wire routed
between post
and post cover
Wire Junction
Outdoor GFCI Outlet
Stair Riser Light
Wire routed
inside top
rail assembly
Wire cannot be
routed inside top
rail of stairs
Wire routed
under deck
Non-Looped
Circuit
Non-Looped
Circuit
Accent Light
Accent Light
Under-Rail Light
Under-Rail Light
Under-Rail Light
Under-Rail Light
In-Deck Light
In-Deck Light
In-Deck Light
16/2 AWG Wire
TimberTech DeckLites LED Layout Overview
Fixture
Wattage
Post Cap Module
3.0W
Accent
1.6W
Under Rail
1.5W
Stair Riser
1.3W
In-Deck
.5W
Содержание DeckLites
Страница 13: ...Notes...
