Do not let people enter your work area. This working area
should be minimum 15 meters, any less is dangerous.
7.1. POSITION AND GUIDANCE OF THE MACHINE
When you are working, hold the blower firmly with one hand
on the handle.
7.2. WORKING WITH THE BLOWER
Always follow the safety instructions given in this manual.
Start the blower and direct the air flow towards the leaves and
materials to be moved. Using the airflow, push these to the
preferred collection spot, a corner closed in by two walls.
Once gathered, shut the machine off and pick up the pile with
a shovel or a broom.
achine
achine
Never make adjustments to the machine when it is running.
Perform all maintenance on the machine when it is on a flat,
clear surface.
rts, in order to obtain
amage and risks to the
se of non original spare
al injury and breaki
Always use appropriate spare parts, in order to obtain the best
operation and to avoid damage and risks to the machine and/or
the user. The use of non original spare parts may risk accidents,
personal injury and breaking the machine.
Make sure to always stop the engine, remove the cap and make sure
that the cutting mechanism is stopped before performing any checks or
maintenance.
Keep the machine clean, especially the areas close to the fuel
tank and the air filter.
parts,
e and the user. The use of
accidents, personal injury
Always use appropriate spare parts, in order to avoid damage and
risks to the machine and the user. The use of non original spare parts
may risk accidents, personal injury and breaking the machine.
yourself.
rburetor, contact a
Adjustment of the carburetor
commend that this is done by
damage to the
ersonal injury, and breaking
fety systems, perform
pare parts by
You may cause accidents, personal injury, and breaking the machine
if you remove the safety systems, perform poor maintenance or
substitute spare parts by non-original parts.
s of the machine, to make
a complete checkup, we
chine to a TIMBERPRO
Perform periodic inspections of the machine, to make sure it is
operating properly. For a complete checkup, we recommend that
you bring the machine to a TIMBERPRO authorized dealer.
8. MAINTENANCE AND CARE
ATTENTION!
Do not modify the machine or the cutting parts.
Improper use of these parts may cause
SERIOUS INJURY OR
DEATH.
1
3
/
109
English
Never make adjustments to th
ance on th
propriate spare
and to avoid
the user. Th
parts may risk accidents, pers
lways use appropriate spar
damage and risks to the mach
non original spare parts may ri
PERIODIC MAINTENAN
8.1. PERIODIC MAINTENANCE
Do not adjust the carbure
with the
Do not adjust the carburetor yourself. If you have problems with
the carburetor, contact a TIMBERPRO authorized dealer
Adjustment of the carburetor is complicated.
Therefore we recommend that this is done by a TIMBERPRO
authorized dealer. Incorrect adjustments may cause
damage to the engine which will void the guarantee.
refore, we
authorized dea
may cau
You may cause accidents
f you remove the
substitut
Perform periodic inspecti
sure it is operating properly. F
hat you bring the
