© 2008 Timberline Tool All Rights Reserved.
4
SAFETY INSTRUCTIONS
SAVE THESE FOR FUTURE REFERENCE
Fire Tool Safety
The FF1-S is designed to be used on single jacket canvas or syn-
thetic hose up to 1-3/4” in diameter.
Observe hose manufacturers’ and industry recommendations and precautions that
apply to shut off of pressurized hose.
Never leave the clamp on the hose unattended for an extended period of time.
Inspect the tool for signs of damage prior to use, and make sure the hose is not
damaged and will be able to withstand the pressure when the fl ow is stopped.
Make sure that the hose is clear of any rock, dirt, debris, etc.
Always hold the clamp away from your body, and keep the clamp
and hose on the ground at all times during the operation.
Do not exceed the pressure rating of the hose or 300 psi.
Use only on 3/4” to 1-3/4” diameter fi re hose sizes.
Remember SAFETY IS FIRST
Workplace Safety
Always follow applicable company and OSHA safety procedures.
Safety fi rst. Timberline shut-off tools must be used by qualifi ed, trained personnel
only and must never be left on the hose unattended.
