GENERAL SAFETY RULES
For all Fire Tools
READ and UNDERSTAND all instructions. Failure to follow all
instructions listed below may result in serious personal injury and/or
damage to the tool.
TIMBERLINE FF1-S
3
INTRODUCTION
Timberline Firefi ghter Clamps are designed to be used to temporarily stop the
pressurized fl ow of water in canvas, rubber or synthetic hose without permanent-
ly damaging the hose.
Prior to using a Timberline Firefi ghter Clamp, the user should consult and
observe any recommendations or precautions from hose manufacturers and
industry standards.
Safety fi rst. Timberline Firefi ghter Clamps must be
installed by qualifi ed, trained personnel only and must never be left on the
hose unattended.
Timberline Firefi ghter Clamps are crafted from high strength aluminum for supe-
rior durability and will not bend or break under normal use. However, care must
be taken to ensure the hose is free of foreign materials, and the proper tool is be-
ing used on the appropriate hose. Avoid excessive force to prevent tool damage.
