Timberk TIR HP1 1500, Инструкция по эксплуатации

Страница: 9 / 28

www.timberk.com • electric ceiling heater
9
1. During operation, it is necessary to periodically (once a year) check the
electric cable contacts and terminal connectors for good tightening.
2. If the body becomes dirty, wipe off dust with a towelette. Radiating
boards should be wiped in cold condition with alcohol.
8. MAINTENANCE
WARNING!
Slight crackles may be heard during operation at the
moment of heating or cooling, which disappear, when
the heater reaches the working mode.
Possible malfunctions and remedies for them:
If you are not able to remedy a malfunction according to the
recommendations or other malfunctions occur, contact the authorized
service center of Timberk.
10. TROUBLESHOOTING
Malfunction Cause Remedy
1. The heater
heats
poorly
1. The heating element is faulty 1. Contact the authorized service center of Timberk
2. Low voltage in the electric mains 2. Check voltage in the electric mains
2. The heater
does not
work
1. No voltage in the electric mains 1. Check presence of voltage in the electric mains
2. Breakdown of the electric cable 2. Check integrity of the electric cable and replace it if necessary
3. Breakdown in the heating element circuit 3. Contact the authorized service center of Timberk
is normal. If the smell persists for a long time, immediately disconnect
the heater from the electric power supply and contact your service
representative.
3. To exclude the appearance of burnt smell when using the heater in the
future it is recommended to keep it clean, preventing the accumulation of
dust on it.
4. Within several minutes after switching on the heater to the heating
element may appear black dots. This is normal and does not affect the
operation of the device.
5. Not recommended for long look at heater heating element, this can
cause deterioration and damage to health.
11. WIRING SCHEMATIC DIAGRAM
12. DISPOSAL
Fig.10
Upon completion of the service life, the infrared heater should be disposed
according to the effective local regulations, rules, and methods. For more
details on disposal of the infrared heater, please contact a representative
of the local authority.
220V~
9. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
Transportation and
storage
From -30°C to +50°C
From 15% to 85%
(without a condensate)
* This product must have storage in dry, well-ventilated space of warehouse
at the temperature not lower than -30°C.