Timberk THU ADF 01, Инструкция по эксплуатации

Страница: 7 / 20

www.timberk.com • electric humidifier
7
In case of emergency situations, refer to the troubleshooting information
given in Table 2. If you cannot resolve problems with the indicated methods,
please contact a service center of the manufacturer.
Table 2
9. TROUBLESHOOTING
IMPORTANT!
To avoid deformation and abrasion of working surface
leading to reduction of pulverization rate or other
malfunctions, do not use metal brushes, blades, or
talc powder for wiping of the pulverizer surface.
If a water leak appears, immediately stop the device
and contact a service center.
To keep the appliance dry, remove water after cleaning
and certainly dry the water tank and device housing.
Make sure that there are no water remains inside the
water tank and device housing.
Before a long pause in use of the appliance, dry the
tank and device surfaces, pack the humidifier to a
plastic bag and then to a box.
Store the appliance in a room with low humidity.
Storage of the device in undried condition results in
formation of mold.
Malfunction Possible cause Remedy
No pulverization.
The power plug is poorly inserted to
the wall outlet. Carefully insert the power plug to the
wall outlet.
White bloom (salts precipitated from
water) appeared on objects around
the humidifier.
1. Lime deposits formed on the
membrane.
2. Used water contains a great quantity
of salts (calcium and magnesium).
1. Clean the humidifier membrane with
the special brush.
2. Use filtered water.
Steam has unacceptable odor.
1. Tainted water is used.
2. Remains of tainted water or debris
accumulated in the appliance housing
or pulverizer.
Clean the device according to the
cleaning/maintenance instructions and
fill the tank with fresh water.
10. TRANSPORTATION AND STORAGE
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
3.
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°C to +50°C
15% to 85%
(no condensate)
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature not lower than -30°C.
The humidifier’s life is 2 years. At the end of life, the humidifier must be
disposed in accordance with regulations, rules and method, effective in
the disposal area.
11. DISPOSAL