Timberk TFH T20MDR, Инструкция по эксплуатации

Страница: 16 / 20

IM2022
16
7. OPERATION OF THE DEVICE
Fig. 2*
1. Power mode switch
Used to select the following power modes:
“0” mode (turning off the device)
“I” mode (half power heating)
“II” mode (full power heating)
2. Thermostat knob
Used to select the heating temperature
*The appearance of the control panel may differ from the images in the manual
Operation of the fan heater
Unit operation
1. Connect the power cord to a wall outlet. Do not use the appliance on uneven surfaces, near
flammable or deformable objects.
2. To activate the heater, set the po
wer mode switch to «I» or «II» position, choosing
comfortable temperature.
3. Using the thermostat knob set the desired heating level in the room. Thermostat maintains the
desired temperature by automatically turning on and off the heating element (temperature range
is from 0 °C to 40 °C). To increase the desired temperature, turn the thermostat knob clockwise,
to decrease the temperature - turn the thermostat knob counterclockwise.