Timberk TCH Q1 800, Инструкция по эксплуатации

Страница: 16 / 32

IM2021
16
Regular cleaning recommendations:

Switch off the appliance, unplug it from the electric mains and let the unit cool
down. Clean the unit’s body with a soft, slightly damp cloth.

It is not recommended to use detergents, including materials containing abrasive
elements.

Do not damage the unit’s surface by sharp objects.
9. TROUBLESHOOTING
Possible malfunctions and methods of removal are given in Table 2.
If you are not able to remedy a malfunction according to the recommendations or other
malfunctions occur, contact the authorized service center.
Table 2
Malfunction Possible causes Removal
The heater heats poorly
The heating element is
faulty Contact the authorized
service center
Low voltage in the electric
mains Check voltage in the
electric mains
The heater does not work
No voltage in the electric
mains Check presence of voltage
in the electric mains
Breakdown of the electric
cable
Check integrity of the
electric cable and if
necessary replace it,
contact the authorized
service center
The automatic circuit
breaker of the electric
mains is faulty
Check operability of the
automatic circuit breaker
and replace the faulty
circuit breaker if necessary
Breakdown in the heating
element circuit Contact the authorized
service center
10. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance with
the laws, rules and methods in region of recycling. Detailed information about
the recycling of the device, you can receive from a representative of the local
authorities, after providing full information about the device. The manufacturer
and authorized organization of the manufacturer do not carry responsibility for
the fulfillment by the Buyer of the requirements of legislation on utilization and methods
of utilization of the device selected by the Buyer. The lifetime of the device is indicated
in the warranty card. Warranty period for the device and warranty terms are specified
in the warranty card. The warranty card is an integral part of the documentation
supplied with this unit. If there is no warranty card in the delivery set, ask for it from the
Seller. The warranty card provided by the Seller must conform to the manu
facturer’s
form.
The manufacturer and the authorized organization of the manufacturer remove
responsibility for any possible harm which can be caused to people, animals or
property directly or indirectly, if this harm occurred as a result of noncompliance with
the rules and operating conditions, installation of the device, intentional or reckless
actions of the user- and / or third parties, as well as in situations caused by natural and
/ or anthropogenic accidents.