Timberk TAP FL250 SF BL, Инструкция по эксплуатации

Страница: 9 / 16

IM2020
9
This instruction manual describes different types of this device. The device you purchased may differ slightly
from the description in the manual, which does not affect the methods of use and operation. The
manufacturer reserves the right to make minor changes to the device without additional notice which is not
fundamentally affect its safety, performance and functionality. There may be some misprints in text and
digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you
may experience using the device. The manufacturer is not responsible for damage of the appliance or its
parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any
part of the appliance has been changed or modified.
NOTE
There is a label on the device which has all the necessary technical data and other useful information about
the device. Use the appliance only for the purpose specified in this manual.
2. SAFEGUARDS
Observe these safety rules when operating the device. Improper operation by ignoring the safeguards may
result in damage to the health of the user and other people, as well as damage to their property. The
manufacturer is not responsible for damage to health and property damage resulting from improper
installation and operation of the device.
1.
Read these instructions carefully before using the appliance to avoid damage during use.
2. Before starting up for the first time, check that the specifications on the product comply with the power
supply specifications.
3. Use only for domestic purposes in accordance with this instruction manual. The device is not intended
for industrial use.
4. Do not use the device outdoors or in high humidity areas.
5.
If the device was at a temperature below 0ºC for some time, it must be kept at room temperature for at
least 2 hours before turning it on.
6. Do not use accessories that are not supplied.
7. The appliance must be monitored during its operation, especially if there are children nearby.
8. The device is not intended for use by persons (including children) with reduced physical, sensory or
mental abilities or in the absence of their life experience or knowledge, unless they are supervised or
instructed on the use of the device by the person responsible for their safety. Children must be
supervised to prevent playing with the appliance.
9. Do not use the appliance if the power cord or plug is damaged, or if the air purifier is defective,
damaged in case of a fall or other circumstances. The appliance must only be operated fully
assembled.
10. If the power cord or plug is damaged, to avoid danger, it must be replaced by the manufacturer,
authorized service center, or similar qualified personnel.
11. To avoid risk of electric shock, do not place the power cord near heating appliances or flammable or
combustible substances.
12. Do not attempt to repair the device or change its parts by yourself. To repair the product, contact an
authorized service center.
13. Always unplug the device before assembling, disassembling and cleaning, or if you are not using it.
14. Install the purifier on a flat, dry surface.
15. The manufacturer and seller are not responsible for damage caused by improper positioning of the air
purifier.
16. Do not lay the power cord under carpets or other objects. Make sure that the power cord does not touch
sharp edges or hot surfaces.
17. Do not allow foreign objects get inside the air purifier.
18. Do not obstruct air inlet and air outlet.
19. The minimum distance from the sides of the device to objects and surfaces is 30 cm.
20. Do not sit, stand, or place heavy objects on the device.
NOTE:
The manufacturer and seller are not responsible for the damage to the device in case of ignoring this
warning.
21. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do
not twist and do not wind it on anything.
22. If the UV lamp breaks, turn off the unit. Do not operate the unit with a broken lamp. Do not use a
vacuum to clean up breakage. Sweep debris into a plastic bag and dispose of properly. Contact your
local waste management authority for instructions regarding recycling and the proper disposal of old
lamp(s).