Timberk T-SF1602RC, Инструкция по эксплуатации

Страница: 15 / 32

IM2021
15
8. OPERATION MANUAL

Place fan only onto dry flat unyielding surface.
BUTTONS:
ON/SPEED - button switches the fan on and shifts between different
speeds. Press button 1 for a low speed, 2 for a medium speed and 3
for a high speed.

OFF - turning off the fan
LIGHT INDICATORS:
 0.5h…4h - fan operating time set

H
– high speed;

M
– middle speed;

L
– minimum speed;
REMOTE CONTROLLER:

Mode settings can be made manually by using switch mode buttons
on control box or by using remote controller:

ON/SPEED - button switches the fan on and shifts between different
speeds.

OFF - turning off the fan

Mode button helps to choose operating mode of fan.

Normal - air stream at constant rate

Nature - air stream by intense waves

Sleep - air stream by weak waves. The fan will operate at
high speed in Nature mode for 30 minutes, the at medium speed in
Nature mode for 30 minutes, and then it will operate at low speed in
Nature mode for remaining time.

Timer button helps to adjust fan operating time up to maximum time
of 7 hours and a half. Each pressing of this button adds half an hour of
fan operating time. For example, if you wish to set operating time of 5
hours and a half, you need to do the following: Press the button “Timer”
several times and see on display: 0.5h, 1h, 4h, that means you have
set 5.5h.
NOTE: The remote control is powered by two 1.5 V AAA batteries.
Batteries for the remote control are not included in the kit.
9. MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear grilles, blades, stand tube and stand base with soft moistened
cloth and wipe dry.

Do not use abrasive cleansers
10. STORAGE

Keep the device in normal conditions in dry place.