Timberk T-SF1602RC, Инструкция по эксплуатации

Страница: 14 / 32

IM2021
14
6. DELIVERY SET
1. Stand fan - 1 pc.
2. Instruction manual - 1 pc.
3. Warranty card - 1 pc.
4. Packing - 1 pc.
5. Remote control- 1 pc.
7. ASSEMBLING INSTRUCTIONS

Fan is packed disassembled. Before assembling make sure that all the required
parts are undamaged and included into the set.

Do not plug in the device before its assembling is finished.

Tighten stand tube to stand base.

Unscrew out-joint, put the stand cover and base cover on the stand base, pull the
extension pole out then tighten the out-joint again.

Place control box firmly on top of extension pole, tighten screw B.

Unscrew the blade cap by turning clockwise and rear grill nut by turning counter
clockwise and put both blade cap and rear grill nut off the motor shaft.

Put rear grille on motor shaft.

Secure it with rear grille nut.

Slide blades on motor shaft so that claws on motor shaft match the blades slots.

Screw blade cap on shaft by turning counter clockwise.

Put front grille on rear grille and close clips or screw grille ring to secure grilles
together.

Adjust the fan vertically by vertical adjustment screw.

The fan is ready for work.