Timberk T-HG2-Q11T, Инструкция по эксплуатации

Страница: 13 / 20

IM2022
13
13. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug.
Do not twist and do not wind it on anything.
14. Store the device in a cool or warm place.
15. The plug should fit into a standard Euro outlet and plug into it without much effort. If it is impossible
to insert euro plug into an outlet or it is hard to do so, flip the plug vertically 180 degrees and try
again. If even after that you cannot easily insert the plug into the outlet, call an electrician to
replace the outlet. Never use the appliance if the plug is not fully inserted into the outlet.
16. The use of extension cords is not recommended. If this is necessary, try to use the shortest
extension cord possible, with a conductor cross-section of the extension cord not less than the
cross-section of the core of the device cord.
17. Do not use the device near explosive and flammable substances.
18.
ATTENTION! DO NOT COVER THE DEVICE while it is operating. Do not dry clothes or any other
fabrics and materials on it. This can lead to overheating, failure, or significant damage to you and /
or your property.
ATTENTION!
The manufacturer considers this type of breakdown as a non-warranty case.
19. Do not leave the appliance unattended for a long time.
20. Install the device only vertically on flat and dry surfaces.
21. Bad contact between the plug of the heater's power cord and the electrical outlet can cause the
plug to overheat.
22. The electrical cable of the device should not be crushed by furniture or be in places where it can
be stepped on. Make sure that the power cord does not touch sharp edges or hot surfaces.
23. It is forbidden to operate the heater in rooms with a relative humidity of more than 93%, with
explosive environment; high dust environment; chemically active environment that destroys metal
and insulation.
24. Do not use the device in rooms with high humidity, near bathtubs, showers, pools, ponds and in
places where there is a possibility of falling into water or splashing water or water drops on the
device.
25. Do not place the device on unstable surfaces. It is forbidden to install the device near or under the
electric socket or under a conducted electric cable. This can lead to overheating of them, which will
create an emergency situation.
26. When turning off the heater, you must first turn off the heating element, leaving the working fan on
for at least 30-60 seconds, and only after that completely turn off the device and unplug the power
cord.
27. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may result in fire, electric shock, or personal injury.
28. CAUTION! Some parts of this product can become very hot and cause burns. Particular attention
has to be given where children and vulnerable people are present.
29. Statement: heater is not located immediately below a socket-outlet
30. WARNING! Do not cover the device in order to avoid overheating.
31. Explanation of warning signs:
Caution! Hot surface Attention! Do not cover
3. APPOINTMENT OF THE DEVICE
An electric fan heater is intended for heating and ventilating spaces of the room, for drying the air, walls and
surfaces in the room.
Electric fan heaters are the best solution when carrying out construction work, for heating warehouses and
hangars, workshops and services, and also for heating rooms and creating comfortable temperature during
cold seasons.
The device is convenient to use and easy to install, economical to use due to minimal energy losses,
increased heat dissipation and efficient distribution of air flow.
Depending on the power, the device can be used in domestic, industrial, warehouse and service premises.
The main advantage of the electric fan heater is that it is able to create a directed large warm airflow,
providing fast and efficient heating of large areas.
The electric fan heater has a sturdy external metal housing protected against corrosion. Air is heated in the
inner casing, when passing through the heating elements, using a low-noise electric motor with a metal
impeller, which takes air through the holes in the air intake grille and blows it through the holes in the air
outlet. Additionally, the device is equipped with a temperature limiter, which turns off the heating elements in
case of overheating. The device has a convenient handle for moving.