Timberk DH TIM 20 E7, Инструкция по эксплуатации

Страница: 10 / 32

www.timberk.com • Electric drier for changing of air humidity
10
10.SERVICE LIFE
11. UTILIZATION RULES
Service life of the appliance is 10 years provided that the respective
installation and operation rules are observed.
Date of the conditioner manufacture is shown in a serial number of the
device. For more details, please, ask a shop assistant.
Upon expiration of the service life, the appliance should be utilized in
accordance with norms, regulations and procedures effective in the
place of utilization.
9. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the
quality of our products. That’s why specifications, design and accessories
are subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse at the
temperature not lower than -30°
Transportation and
storage
From -30° to +50°
From 15% to 85%
(without a condensate)
8. TROUBLESHOOTING
Problem What to check
Unit does not start
• Make sure the dehumidifier s plug is pushed completely into
the outlet.
• Check the house fuse/circuit breaker box.
• Dehumidifier has reached its preset level or bucket is full.
• Water bucket is not in the proper position.
Dehumidifier does
not dry the air as it
should
• Did not allow enough time to remove the moisture.
• Make sure there are no curtains, blinds or furniture blocking
the front or back of the dehumidifier.
• The humidity selector may not be set low enough.
• Check that all doors, windows and other openings are
securely closed.
• Room temperature is too low, below 5
0
C(41
0
F).
• There is a kerosene heater or something giving off water
vapor in the room.
The unit makes a
loud noise when
operating • The air filter is clogged.
• The unit is tilted instead of upright as it should be.
• The floor surface is not level.
Frost appears on the
coils This is normal. The dehumidifier has Auto defrost feature.
Water on floor
• Hose to connector or hose connection may be loose.
• Intend to use the bucket to collect water, but the back drain
plug is removed.
ES, AS, P1 or P2
appear in the display
These are error codes and protection code. See the CONTROL
PADS ON THE DEHUMIDIFIER section.
Before calling for service, review the chart below first yourself.