Timberk AC TIM 18LC DT3 страница 4 Скачать руководство пользователя

Страница: 4 / 17

www.timberk.com • Electric air conditioner

4. APPLIANCE DESCRIPTION

5. DELIVERY SET

6. APPLIANCE CONTROL

The conditioner consists of indoor and outdoor units connected by

pipelines. The conditioner is controlled from a remote control board or from

a control panel of the indoor unit.

Complete set of air conditioner (split system) includes:
Conditioner unit for indoor installation - 1 piece
Conditioner unit for outdoor installation - 1 piece
Remote control - 1 piece
Batteries for remote control board - 2 pcs.
Operator’s manual -1 piece
Warranty card- 1 piece
Packing of indoor-installation unit - 1 piece
Packing of outdoor-installation unit - 1 piece

The conditioner is controlled from a remote control board or from a control

panel of the indoor unit.
Figure 2. Description of indoor unit control board
Control and indication board of your conditioner may visually differ from a

layout view shown below. Its functions will remain the same.

18. Select-mode button “MODE”. Using this button, you may select a

required mode: Auto, Cool, Dry, Heat, Fan.
19. Button “TEMP” (decrease/increase) for setting of the required air

temperature from 16 to 32°С. Using this button, you may set the required

air temperature indoors.
20. Button “ON/OFF”. Using this button, you may turn the conditioner on

or off.
21. Button “FAN SPEED”. Using this button, you may select rotation speed

of the indoor unit fan: “Auto”, “High”, “Middle”, “Low”.
In “Auto” mode the fan speed will change automatically. In dry mode the

fan speed will remain unchanged “Low”.
22. Button “SWING”. Using this button, you may regulate position of air-

relief blinds and forward treated air to various directions. *
23. Button “AIR FLOW”. Using this button, you may turn the blind swinging

on and off. *
24. Button “TIMER”. Using this button, you may set the time for turning the

conditioner on and off (from 1 to 24 hours). If the conditioner is off, you may

set the time for automatic turning on in a set time interval. And vice versa, if

the conditioner is on, you may set the time for automatic turning off.
25. Button “SLEEP”. Using this button, you may turn the sleep mode on

and off. In this mode the fan speed will be low.
26. Button “TURBO”. Using this button, you may turn the turbo mode on

and off. In this mode the conditioner shows the maximum cooling (in cool

mode) or heating (in heat mode) capacity. This mode cannot be used in

modes: Auto, Dry, Fan.
27. Button “HOLD”. Using this button, you may lock all other buttons of the

control board, including the button on indoor unit control panel. To unlock

this mode you should press this button once more.
28. Button “CLEAN”. This button is not used for this series of conditioners.
29. Button “LAMP”. This button is not used for this series of conditioners.
Indication of the control board display shall correspond to selected modes.
Work with remote control board
Mounting and replacement of batteries: mount two LR03 alkaline batteries,

according to polarity indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert used

batteries or batteries of various types.

12. The receiver of infrared signals from the remote control.
13. Running indicator light.
14. Defrosting-Preheating indicator light.
15. The timer indicator.
16. Indicator alarm status.
17. Button controls in the absence remote control.
Emergency control shall be used if the remote control board is lost or

broken, or batteries are low. Using an emergency control button (17, Fig.

2) situated on the indoor unit control panel you may select COOL or AUTO

mode of the conditioner work. Pressing this button, select a mode of the

conditioner work: AUTO, COOL, the conditioner is OFF, AUTO again, etc.

1. Air outlet
2. Air inlet
3. Drain pipe
4. Liquid pipe
5. Gas pipe
6. Electric control cabinet
7. Hook
8. Indoor unit
9. Outdoor unit
10. Intake grilles outdoor unit.
11. Air discharge grill outdoor unit.