Timberk AC TIM 18LC CF5, Инструкция по эксплуатации

Страница: 7 / 32

www.timberk.com • Electric air conditioner
7
Emergency control shall be used if the remote control board is lost or
broken, or batteries are low. Using an emergency control button situated
on the indoor unit control panel you may select COOL or AUTO mode of
the conditioner work. Pressing this button, select a mode of the conditioner
work: AUTO, COOL, the conditioner is OFF, AUTO again, etc.
1. On-off button the air conditioner
2. Mode button mode selection
3. Speed Button - fan speed
4. Button temperature increase
5. button reduce temperature
6. Sleep Button - Night mode
7. IFavor button allows you to return the air conditioner settings
8. When the IFeel mode, the display shows the temperature in the room,
switched off - set
9. Turn on / off display
10. Timer button - switch timer
11. Not available for this series
12. Swing button to change the direction of the vertical blinds
Work with remote control board
Mounting and replacement of batteries: mount two LR03 alkaline batteries,
according to polarity indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert used
batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the
board or else electrolyte may leak and damage the board.
In normal operation of the conditioner average service life of batteries will
be about a half-year.
Replace batteries, if command receiving is not confirmed with an audio
signal, or if the display does not show a sign of command transfer.
When generating commands from the remote control board, point an IR-
radiator on a remote-control signal receiver situated on the indoor unit.
Hold the remote control board at the distance of no more than 8 m from
the indoor unit.
Fig. 3
13. Not available for this series
14. Turbo button (maximum fan speed)
15. Not available for this series
16. The Panel control panel display
17. Not available for this series