Timberk AC TIM 07H S20, Инструкция пользователя

Страница: 13 / 44

www.timberk.com • Electric air conditioner
13
QUIET button
Press this button to turn on or turn off the QUIET function in cool heat auto
mode.
ECO button
In cool mode, press «ECO» button and the unit will operate under ECO
mode.
ECO button
Press this button can turn off the light for indoor unit’s display. « » icon on
remote controller will disappear.Press this button again to turn on the light
for indoor unit’s display. « » icon on remote controller will be displayed.
Function introduction for combination buttons
Child lock function
Press « » and « » simultaneously to turn on or turn off child lock function.
When child lock function is on, « » icon is displayed on remote controller.
If you operate the remote controller, the « » icon will blink three times
without sending signal to the unit.
Temperature display switchover function
In the off mode, press « » and «MODE» buttons simultaneously to switch
temperature display between
0
C and °F.
The minimum cooling temperature setting
IIn the off mode,pressing «TEMP» and « » button at the same time,the
LCD will display the minimum cooling temperature.The default temperature
is 16 0 C and you can adjust the temperature with « » or « » from 16 0 C
to 31
0
C . After pressing the «TEMP» and « » button with 3 seconds it will
return to the standby mode.
The maximum heating temperature setting
In the off mode,pressing «TEMP» and « » button at the same time,the LCD
will display the maximum heating temperature.The default temperature is
31 0 C and you can modulate the temperature with « » or « » from 16 0 C
to 31 0 C . After pressing the «TEMP» and « » button with 3 seconds it will
return to the standby mode.
Timing defrost
In the heating mode, press «SLEEP» and «TURBO» buttons together for 3s
would start or cancel the Timing defrost.
Low temperature heating function setting
In heating mode, pressing «Mode» and « » button at the same time will
enter/exit the low temperature heating function.
«LA» would be showed on the remote controller after entered into the low
temperature heating funtion.
When switching from one mode to another mode, low temperature heating
function was canceled. Turn off and then turn on air conditioner that will
remain the low temperature heating function. After powered on, the low
temperature heating mode was default to off status.
In the low temperature heating mode, «SLEEP» and «Low temperature heating»
function cannot start at same time. When low temperature heating mode has
already started,meanwhile you press the «sleep» button, the air conditioner will
exit low temperature heating mode and enter the sleep mode. Vice versa.
NOTE:
Press «TURBO» or «FAN» button the unit will quit this
function.
This function is no use in fan mode or dry mode.
NOTE:
Remote controller displays «ECO».
Air conditioner will operate at auto fan speed. Set
temperature can’t be adjusted.
Under cool mode, sleep function can not work with
ECO mode together at the same time.
Change mode will exit the ECO mode.