Timberk AC TIM 07H S10B, Инструкция по эксплуатации

Страница: 8 / 36

www.timberk.com • Electric air conditioner
8
Fig. 3
a b c d e
f g
а) Power supple indicator
b) Sleep mode indicator
c) Operation indicator
d) Temperature indicator
e) Timer indicator
f) Heating mode indicator***
g) Cooling mode indicator
* use of particular indicators depends on model and series.
** design of indicator symbols may differ depending on model and series.
*** in some series of simultaneous use of indicators cooling and heating
(simultaneous flashing glow) can display modes of drainage and ventilation
1.Button «ON/OFF» (Power). Using this button, you may turn the
conditioner on or off.
2, 3.Buttons «TEMP» (increase/decrease). Using this button, you may set
needed air temperature indoors.
4.Button «FAN». Using this button, you may select rotation speed of the
indoor unit fan: «Auto», «High», «Middle», «Low».
In “Auto” mode the fan speed will change automatically. In dry mode the
fan speed will remain unchanged – “Low”.
5.Button «SWING U-D». Using this button, you may regulate position of
air-outlet blinds and forward treated air up and down.
6.Button «TIMER». Pressing this button, you may set the time for turning
the conditioner on and off (set the time by pressing “TEMP" buttons up and
down). If the conditioner is off, you may set the time for automatic turning
on in a set time interval. And vice versa, if the conditioner is on, you may set
the time for automatic turning off. Before activation of the Timer function
you may specify the needed settings.
7.Button «SLEEP» (Night Care). Using this button, you may turn the sleep
mode on and off. Use this mode to reduce operation sound when sleeping,
etc. Press the SLEEP button, the air flow sound from the indoor unit is
decreased. Press the SLEEP button again can release the mode.
8.Button for selection of operating mode – «MODE». Using this button, you
may select a needed operating mode: AUTO, COOL, DRY, HEAT, FAN.
9.Button «TURBO». Using this button, you may turn the turbo mode on
and off. In this mode the conditioner shows the maximum cooling (in cool
mode) or heating (in heat mode) capacity.
10. Button «SWING L-R». Using this button to adjust the direction of air
flow. Pressing this button will wiggle horizontal blinds.
11. Button «Ion». Using this button can be switched on and off air ionizer
12. Button «Light». Using this button you may turn on and turn off the
backlight
13. Button «Lock». Using using this button (if you press for more than 3
seconds) can be switched on and off key lock.
Indication of the control board display shall correspond to selected modes.
Work with remote control board
Mounting and replacement of batteries: mount two LR03 alkaline batteries,
according to polarity indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert used
batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the
board or else electrolyte may leak and damage the board.
Description of remote control board