TIMBER BEAM CUTTER OWNER’S MANUAL
TIMBER BEAM CUTTER OWNER’S MANUAL
BEAM CUTTER USE AND CARE
•
Do not modify the beam cutter in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment.
•
Always check for damaged or worn out parts before using the beam cutter.
Broken parts will
affect the beam cutter operation. Replace or repair damaged or worn parts immediately.
•
The beam cutter is for OUTDOOR use ONLY.
CAUTION:
• When lifting logs, ALWAYS use CAUTION as logs can fall or drop. Heavy logs can cause injury
to feet, legs, and hands. ALWAYS wear protective clothing including steel toe boots, leather
gloves, and leg and arm protection. Logging chaps should be used at all times while operating
a chainsaw.
PARTS DIAGRAM:
PARTS LIST:
For replacement parts and technical questions, please call
1-218-943-6290.
MAINTENANCE
• Maintain your beam cutter.
It is recommended that the general condition of the beam cutter be
examined before it is used. Keep the beam cutter in good repair by adopting a program of
conscientious repair and maintenance in accordance with the recommended procedures found in this
manual.
• Be sure to tighten all nuts and bolts before use.
• Keep the beam cutter clean.
A properly maintained beam cutter will work more effectively. Keep all
parts dry, clean, and free from oil and grease.
• Cleaning.
Use only soap and a damp cloth to clean your beam cutter.
WARRANTY
One-year limited parts warranty
BAC Industries
PO BOX 155
Miltona, MN 56354
Made in CHINA
2 of 3
3 of 3
Part#
1
2
Description
Bolt M10×40
U clamp
Qty.
2
1
Part#
3
4
Description
Frame
Leveling Bubble
Qty.
1
1
Size:145x210mm
157G
铜版纸
REV 08/29/16
