Safety - Safety Decals Installed On Machine
1.2.3
Use of this ROPS in a damaged, modified
or abused condition or with prior overturn
is unsafe and the operator protection is no
longer suitable and must be replaced.
Any alterations, modifications, add-ons
or repair without the written consent of
TIMBCO HYDRAULICS, INC. will void the
product’s warranty, liability and
certification.
Fan guard must be bolted in place before
operating unit.
Keep clear of all moving parts. Serious
personal injury could result.
Do not remove the tank support with the
hydraulic tank installed.
If the tank support must be swung out of
the way, be sure the hydraulic tank is
supported by other means.
Serious personal injury or damage to the
equipment could result.
Form M185
Located on upper rear horizontal member inside the cab
00466
WARNING
Located in several places around engine fan shroud
00287
WARNING
Located on the side of the hydraulic tank near the boom
00285
CAUTION
Located in several places around engine fan shroud
00287
CAUTION
