1
INSTRUCTIONS FOR USE
Bath grab bars 30 cm /40 cm /45cm /60 cm /80 cm
Product code: JMC-C
54012 /16 /18 /24 /32
1.
Characteristics
Bath grab bars are made of powder coated steel frame. Owing to the
application of several protective layers, they are resistant to humidity.
The grab bars can be assembled vertically or horizontally.
The set includes:
a.
handle
b.
screws – 6 pcs
c.
rawlplug – 6 pcs
d.
rubber washers
2.
Application
Bath grab bar
is ancillary equipment which facilitates tilting to erect
position and keeping balance. The grab bars are recommended to
people with reduced mobility which prevents or hinders the unassisted
performance of daily living activities. The bath grab bars can be used in
the shower, in the bath, in bathrooms and other humid rooms at home
and in hospitals.
3.
Assembly and general recommendations for use
Note!
Follow the information contained in this manual while assembly.
Users with reduced mobility may need help from a third person who
has appropriate skills.
Note!
Do not use the grab bars when you notice any visible or
perceptible damage (e.g. crack) as this may cause an accident.
Step 1.
Decide and mark the place on the wall where bars will be fixed.
Step 2.
Bore assembly holes in the wall using drill at the appropriate
height and width.
