TIM ARKON, Инструкция по эксплуатации

Страница: 11 / 32

2 Safety information
ARKON Data Bridge SW 1.00.n, Instructions for Use (en-GB) 11
2.1.11 Electromagnetic compatibility (EMC)
Medical electrical devices are subject to special precautions regarding electromagnetic
compatibility (EMC). They must be installed and operated in accordance with the EMC instructions
contained in the accompanying documentation.
Electrostatic discharges
If no protective measures are taken against electrostatic discharges, malfunctions may occur in
certain situations, possibly resulting in personal injury.
In order to avoid malfunctions, comply with the following measures and train the personnel
involved:
Observe the ESD protective measures.
These measures may include wearing antistatic clothing and shoes, touching a potential
equalization bolt before and during connection, or using electrically insulated and antistatic
gloves.
Comply with the requirements for the electromagnetic environment.
Only use approved electronic accessories, e.g. mains adapter.
Electromagnetic disturbances
If devices that emit electromagnetic radiation (e.g. mobile telephones or medical electrical devices,
such as defibrillators or electrosurgical units) are used near to the Data Bridge, its proper
functioning may be affected by electromagnetic disturbances.
Maintain a distance of at least 0.3 m (1.0 ft) between the Data Bridge and radio
communication devices to make sure that the Data Bridge can function optimally.
2.1.12 Infection risk
In order to avoid an increased infection risk for patients and users from a contaminated device, the
Data Bridge must be cleaned.
Comply with the hygiene regulations of the location where the Data Bridge is being used
(e.g. Intensive Care), including the cleaning interval and cleaning method.
Clean the Data Bridge as descripted in chapter 7.
Clean the Data Bridge before maintenance and before it is returned for repair purposes.