13
7.3 STARTING FIRE
When temperature of gases in firebox achieves temperature set by parameters, system is entering
Starting fire mode. Display shows FLAME LIGHT and led indicator
“ON/OF” blinks.
Picture 10.
Display appearance:
„FLAME LIGHT“
In this phase, temperature should remain stabile for period which is already set by parameters.
7.4 OPERATION MODE
Stove is entering Operation mode after the temperature of exhaust gasess achieve value which is
bigger than temperature set by parameters.
Display will show
„FLAME ON“, led indicator “ON/OFF” is turned on constantly.
Press P2 to set power. Room temperature is set by pressing P1.
Exhaust gases temperature continue to grow and when it reach next set point (determined by
parmaeters), convection fan starts to blow (convection fan indicator on display will turn ON).
Picture 11.
Display apperance
„FLAME ON”
After time period set by Paramter, system is cleaning the burning pot automatically and display
shows
, „CLEANING FIRE POT. During cleaning, auger is working slowly (led indicator is turned
ON), and exhaust fan speed is increasing (picture 12.).
After the cleaning, stove in entering back in to the Operation mode.
Picture 12.
Display apperance
„CLEANING FIRE POT”
RITTIUM 3 (3P) offers 5 power modes, P1 (min.) - P5 (max.).
Depending on power mode, auger is set to work in time periods (led lamp is turning on and off).
Lighter remain turned of (Led indiocator is turned off).
