12
7. OPERATING THE STOVE
This chapter describes the way the sotve is functioning since moment of start until it is turned off,
programing included
7.1 STARTING THE STOVE
Before starting the stove, display will show
„OFF“. In order to start the stove press P3 for several
seconds. When stove is started, display will show
„ON“ which is presented on picture 8. Led
indicator ON/OFF will swich on..
In this phase, lighter/igniter is getting warmer (which is indicated with led lamp on display) and
exhaust fan starts to work.
Exhaust fan will be operational always when stove is ON but also it will continue to work after the
stove is OFF.
Picture 8.
Appereance on display
: „ON“
7.2 INITIAL PELLET LOADING (LOAD PELLET) AND STARTING FIRE
After time period which is already set by parameters loading of burning pot will standard display
will show LOAD PELLET. Led indicator ON/OFF starts to blink.
During loading pellet, Lighter stays ON and auger is transporting pellet from storage to burning
pot. (led lamp which indicate lighter is ON) . Pellet starts to get warmer and to produce warm
gases which are causing rise of temperature.Temperature change is registrated by temperature
probe mounted inside the exhaust.
Picture 9.
Display appearance:
„LOAD PELLET”
