Tim Sistem NIKA- HYDRO, Руководство пользователя

Страница: 13 / 28

During the firing, primar air regulator button, located on the back side of the stove, turn to
fully open flap position, in the direction shown in Figure 6a. During the operation, depending
on the temperature, the regulation flap will open and close automatically. If you want a lower
temperature than the set one, turn regulator button to the desired position of minimum open
flap 6, which closes the regulator flap.
Figure 6a Figure 6b
II - regulation of secondary air
Secondary air regulator put into position „open“ (Figure 7a) during firing and keep in this
position until establishing the stable operation of the stove after loading some larger pieces
of wood or briquettes. After that, depending on the position of the regulator it will also depend
the intensity of burning. If the regulator of secondary air remains in open position, intensity of
burning will be maximal, while if the secondary air regulator is in closed position (Figure 7b)
intensity of burning will be minimal.
Power regulation of the stove is obtained by adjusting the regulator of the primary and
secondary air.