8
3.3
Analog Outputs
Click
Analog Outputs
tab to configure the analog outputs.
The analog outputs can be freely configured to the desired measured quantity within
the allowed measuring ranges. Select the quantity you want to measure using the drop-
down list. In the
Input Secondary
field the start values are to be written in the first
space, any breakpoints afterwards and the end value at last. Under
Output Value
the
corresponding values of the output signal are indicated.
Click
Apply configuration
to transfer and save the new settings in the transducer.
To simulate the outputs for testing purposes, please choose Fixed Output, fill in the
desired value and click
Apply configuration
.
Activation of an analog output.
Drop-down list for selection of
measured values and desired
rows for the results .
