13-4
2GX/AERO X Owner’s Manual
OM_2GX/AERO X_0413RevA
CHAPTER 13: ANTI-TIPS
Note:
Unless you ordered User-Friendly Anti-Tips when you originally ordered your TiLite 2GX or Aero X, you will need to
order replacement Allen screws when ordering User-Friendly Anti-Tips.
Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench
1. Remove the rear wheels and place the frame on a level surface.
2. Do not disassemble the mounting plate from the anti-tip receiver. Align the mounting plate with two holes in the rear of
the frame and install the new Allen screws through the various washers, frame and plate as shown in Figure 13-7.
I
WARNING
Make sure the TiLite logo is visible on the rearward side of the User-Friendly Anti-Tip receivers as shown in Figure 13-7 and
the white arrows are all aligned on the opposite (forward) side of the anti-tip components as shown in Figure 13-7.
If you
ignore this Warning, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage
the wheelchair.
3. Securely tighten all Allen screws and locknuts.
4. Reinstall the rear wheels.
5. With the wheelchair standing upright on a level surface, engage the anti-tip as described under “Engaging the Anti-Tip”
on page 13-2.
6. Adjust the height of the anti-tip as described under “Adjusting the Anti-Tip” on page 13-3.
I
WARNING
Before sitting in the chair, make sure the anti-tips are operating properly. To do this, place the unoccupied chair on a level
surface, engage the anti-tips and tip the chair backward until the anti-tips are supporting the weight of the chair. Apply
sufficient pressure to ensure that the anti-tips are operating properly.
If you ignore this Warning, you may fall, tip over or
lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair.
!
WARNING
TiLite Logo Must Face
Rearward and Arrows
on All Anti-Tipper
Components Must Align.
Figure 13-7
Mounting the Anti-Tip
Allen Screws
Mounting
Plate
Anti-Tip
Receiver
Locknuts
Washers
Coved
Washers
Содержание Aero 2GX
Страница 1: ...OWNER S MANUAL SERIAL NUMBER ______________________ ...
Страница 49: ......
Страница 89: ......