TiLite Aero 2GX Скачать руководство пользователя

Страница: 39 / 103

3-10

2GX/AERO X Owner’s Manual

OM_2GX/AERO X_0413RevA

CHAPTER 3: FOOTRESTS

Note:

The ELR can only be rotated outward to be removed or positioned out of the way.

Note:

To swing the ELR outward, push the release lever and rotate the ELR outward. See Figure 3-17.

Note:

To remove the ELR from the wheelchair, push the release lever, swing the ELR outward and remove the top pivot

from the frame hole, lifting the ELR.

Adjusting the ELR Length

Tools Needed:

• 5/32” Allen Wrench

1. Remove the Allen screw, lock washer and pad stop which secure the pad stop and footrest extension in place. Note the

order of the lock washer and pad stop. See Figure 3-18.

2. Slide the footrest extension to the desired length.

3. Align the hole in the main tube with the hole in the footrest extension and the pad clamp slot.

4. Reinstall the Allen screw, lock washer and pad stop. Securely tighten.

5. If the desired ELR length has not been achieved, repeat Steps 1-4.

Figure 3-18

Elevating Legrest

Hex Bolt

Calf Pad

Pad

Clamp

Allen

Screw

Pad Stop

Main Tube

Footrest

Extension

Pad

Clamp

Slot

Washer

Adjusting the Footrest

To adjust the position of the Depth Adjustable footrest on the ELR, see “Adjusting the Depth” on page 3-3.

Содержание Aero 2GX








































































































Результаты поиска

Содержание Aero 2GX

Отзывы:

Похожие инструкции для Aero 2GX

Бренды по названию

Популярные бренды

TiLite Aero 2GX, Руководство пользователя

Результаты поиска

Содержание Aero 2GX

Отзывы:

Похожие инструкции для Aero 2GX

Бренды по названию

Популярные бренды