TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TFM-500 Installation & Operating Instructions
TiL 98RE243 Rev. N/C Issue 12
2-8
2.13
PROGRAMMING CTCSS TONES/DPL CODES (continued)
The following is a list of the available CTCSS tones:
Number
Tone
Number
Tone
Number
Tone
1
67
26
162.2
51
177.3*
2
71.9
27
167.9
52
183.5*
3
74.4
28
173.8
53
189.9*
4
77
29
179.9
54
196.6*
5
79.7
30
186.2
55
199.5*
6
82.5
31
192.8
56
206.5*
7
85.4
32
203.5
57
210.7*
8
88.5
33
33.0*
58
218.1*
9
91.5
34
35.4*
59
225.7*
10
94.8
35
36.6*
60
229.1*
11
97.4
36
37.9*
61
233.6*
12
100
37
39.6*
62
241.8*
13
103.5
38
44.4*
63
250.3*
14
107.2
39
47.5*
64
No Tone
15
110.9
40
49.2*
(carrier
squelch
only)
16
114.8
41
51.2*
17
118.8
42
53.0*
18
123
43
54.9*
19
127.3
44
56.8*
20
131.8
45
58.8*
21
136.5
46
63.0*
22
141.3
47
69.4*
23
146.2
48
159.8*
24
151.4
49
165.5*
25
156.7
50
171.3*
TABLE 2.1
Available CTCSS Tones
NOTE:
The tones marked with * are non-standard tones.
5. Press ENTER. "TX TONE" appears on the display. Repeat step 3.
6. Press ENTER. "G1 TONE" appears on the display. Repeat step 3.
7. Press ENTER. "G2 TONE" appears on the display. Repeat step 3 and press ENTER.
8. The display will now show "RX DPL:" and the current 3 digit DPL code. If no DPL code is
required, "000" should be entered. Please note that if a DPL code is to be programmed a CTCSS
tone should not be enabled.
9. Use the keypad to enter the required octal 3 digit DPL (Digital Coded Squelch or DCS) code. A
list of all usable and unique octal 3 digit DPL/DCS codes follows:
