tiki D755953, Руководство пользователя

Страница: 8 / 12

8. Cleaning and Care
The Tiki has been designed to be used for a long time. If the mask is contaminated it can be cleaned and disinfected and put
to use again. If it is damaged it should be recycled. If it is contaminated beyond restoration it should be disposed of.
∞ Clean the Tiki using a cloth with a mixture of water and mild detergent. Do not use any solvents. During cleaning ensure
that no water is allowed to enter the blower unit. The blower unit should never be immersed in fluid.
∞ Use a disinfecting spray like Incidur
®
(Ecolab
®
Healthcare) on the outside of the blower unit to remove bacteria and germs.
∞ Dry the Tiki with a cloth and/or leave it to dry in the open air.
)
WARNING
∞ Do not open the blower unit and never modify or alter this product as this will void any warranties.
9. Storage
To maintain the integrity of the batteries (both the internal battery in the blower unit and the external battery pack), please
follow the guidelines below when storing your device.
Long term storage (>6 months)
. . . . . . . . . . . .
17°C to 28°C at <60% RH
Medium term storage (<3 months)
. . . . . . . .
0°C to 38°C
Short term storage (<1 month)
. . . . . . . . . . . . .
-20°C to 40°C at <30% RH
10. How to Read the QR Code
Tiki Safety products have a QR code that can be easily read by most smartphones that have a QR code reader application
installed. The QR code contains the serial number information about your Tiki Safety product: PN stands for "Part Number",
D for "Date", B for "Batch number".
Example: PN105202D1505B01
Information: Tiki Starter Pack Medium, manufactured year 15 month 05 with batch number 01.
)
WARNING
If the outside of the Tiki has been exposed to pathogens it may need to be disinfected or sterilised. Take care not to contam-
inate the blower unit.
*If the device was used in a hazardous environment there may be hazardous particles on the mask and in the filter. It may
need to be disposed of as hazardous goods. Please dispose of according to local, state and federal laws.
7. Changing the Mask and Filter
Step 1.
Remove the filter by twisting it 30° anti-clockwise.
Step 2. Remove the blower by gently sliding in your index
finger between the blower and the top of the mask. Grab
the blower unit with your thumb and index finger and pull
gently. The blower should slide out. If it does not, insert your
index finger further, separating the blower from the mask
more and pull again.
Step 3.
Dispose mask and/or filter. Please consider the
environment and dispose these parts as plastic recyclables*.
Step 4.
Remove new mask/filter from the packaging.
Step 5.
Attach the straps if they are not already attached.
Step 6.
Insert the blower unit according to illustrations for
‘Initial use’ in this manual (Fig 5, page 3).
Step 7.
Attach filter to the blower unit (Fig 6, page 3) by
twisting it 30° clockwise (Fig 7, page 3).