tiki 1200-51, Руководство пользователя

Страница: 15 / 48

ENGLISH – Tiki medical
15
The speed of the blower in the blower adapts automatically to create a positive
pressure of 0.2 mbar.
Therefore, it is important that the user calibrates the blower at every use of the
Tiki medical mask and as the user enters another space as for example: inside versus
outside, floor, operating room etc.
Refer to the procedure: 4.4 Calibrate the blower on page 31.
2.2 Buttons and indicator lights
The blower of the Tiki medical mask and hence the Tiki medical mask contains the
following buttons, lights and indicator lights.
The buttons can be used as the blower is positioned in the mask.
Refer to figure 11:
11a The on / off button
11b The lights to apply extra light at the work spot
11c The button for the lights at 11b
11d Three (3) indicator lights
2.2.1 The on / off button
Use the on / off button to:
■ ■
Calibrate the blower unit according to: 4.4 Calibrate the blower, on page 31.
■ ■
Start and stop the blower unit.
To do so, press and hold the on / off button for 3 seconds
■ ■
Adjust the blower unit speed according to: 4.5 Adjusting the blower unit speed,
on page 31.
2.2.2 The lights
Use the lights to cast extra light on the working area.
2.2.3 The button for the lights
Use the button for the lights to:
As the blower is ‘on’, switch on or switch off the lights