P/N:
922xxx01
Rev A 4/07
17
3.1
Main Screen
The
Main
screen essentially provides a list of all
HPTurbo1
devices logically connected to the
computer where the utility is running. (If the status is not updated, please close and open the
utility again).
The
top panel
shows the local
HPTurbo1
device found connected to the computer’s NIC
(Network Interface Card). See Figure 2
.
In this case the MAC address of device connected
locally to the PC is 00:30:0A:4B:B5:C7.
Figure 2
The lower panel displays all the HomePlug devices, identified on the current logical network
(remote devices). Displayed immediately above this pane list is the number of remote devices
found, the type of logical network (Public or Private), and a message area that reports
connectivity and scan status. The following information is displayed for each of the devices
discovered that appear in the lower panel.
The Device Name column shows the default device name, which may be user re-defined. A user
may change the name by clicking on the name and editing in-place, or by using the Rename
button.
The MAC Address column shows the device’s MAC address.
The Password column shows the user-supplied Device Password (initially left blank).The Device
Password can be found on the label at the back of the unit. A user may enter the password by
using the Enter Password button (explained below).
