23
rent unit. Press again for 3 seconds to switch the unit off.
Volume adjustment:
Press the or buttons on the parent unit to adjust the speaker volume. You can choose between
five volumes and a silent mode. The unit will beep twice when the maximum volume has been set. The
chosen volume is displayed at the top of the screen.
Visual indicators for “your baby’s sound intensity”:
The parent unit has five LEDs which display the sound intensity of any noises
made by your baby. The louder the noise, the more lights will be illuminated
on the parent unit. In this way, you will know when your baby is crying, even if
the sound on the parent unit is switched off.
Visual and sound indicators for “connection between both units”:
When the connection between the parent and baby units is broken, the
symbol on the screen will
start to blink and frequent beeps will sound. This may occur when the parent unit is out of range of the
baby unit or if the baby unit is switched off. Once the connection has been restored, the symbol will
stop blinking and the beeps will stop.
Sound indicator for “battery level”
The battery life for the parent unit is between 10 and 12 hours (depending on how often you use the
baby alarm). The battery level is displayed on the screen:
Battery fully charged
Battery sufficiently charged
Battery almost dead, recharge now
Battery dead, the parent unit will switch itself off
Notes:
• Just before the parent unit switches itself off due to a dead battery, several warning beeps will sound.
• It takes around 4 hours to recharge the battery. While charging, you can use the baby alarm normally.
• The battery charge current is automatically limited. This means that you can leave the unit perma-
nently plugged in without any risk of overload.
Walkie-talkie:
Press the ••• button on the parent unit to talk to the baby unit.
Keep the button pressed down when you’re speaking and let go when you want to listen.
Lullabies:
• Press the
button on the parent unit to make the baby unit play a lullaby. Press the button again to
switch to the second lullaby. 2 lullabies are available.
• The lullaby is played continuously for 15 minutes. To stop it, press the
button again (twice if the
first lullaby is being played, once if the second lullaby is being played).
• The volume on the baby unit is fixed and cannot be modified.
Note:
you can hear the lullaby through the speaker on the parent unit as it is picked up by the baby
unit microphone. If you do not want to hear the lullaby, we recommend switching off the sound on the
parent unit.
Temperature display:
• The parent unit screen will display the temperature measured by the baby unit. You should note that
C
C
Visual indi-
cators
