TigerStop TigerSPC, Руководство по установке

Страница: 9 / 20

9
Zeroing
Measuring
Place the jaw in the grooves of the TigerSPC
Attachment Mounting Point. TigerSPC’s jaw magnets
will keep it in place.
HOLD (3 Seconds)
1. Close TigerSPC jaws.
2. Hold the Calibrate button for 3 seconds.
3. The measurement display will change to 0.000.
Note: If you are using the Reference Value setting, the display will show the reference you have set.
1. Open TigerSPC jaws.
2. Place the part to be measured in the jaws.
Note: For maximum accuracy, ensure the part is lying fl at and the ends are held securely.
3. Gently close the jaws.
4. The measurement will display on the TigerSPC screen.
Place