TigerStop TigerSaw Miter, Руководство пользователя

Страница: 25 / 52

19
Jog Reverse swaps the direction of the jog buttons ( pg. 13 ).
To change the jog directionality:
1. Access the Setup menu ( pg. 14 ) and press repeatedly until the JogRevrs screen is displayed.
2. Press the [
↓
] soft key, enter the password, and press .
• The default password is the serial number.
3. Press the [ ↓ ] soft key to toggle between YES and NO.
4. Press the [Done] soft key to return to the ready screen.
To disable quick calibration:
1. Access the Options menu ( pg. 14 ) and press repeatedly until the Show Cal screen is displayed.
2. Press the [
↓
] soft key, enter the password, and press .
• The default password is the serial number.
3. Press the [
↓
] soft key to toggle the setting.
4. Press the [Done] soft key to return to the Ready Screen.
To change the interconnect behavior:
1. Access the SysInfo menu ( pg. 14 ) and press repeatedly until the Set TIK screen is displayed.
2. Press the [ ↓ ] soft key, enter the password, and press .
• The default password is the serial number.
3. Use the [ ↓ ] soft key to select an option.
• The options are described in the section on interconnect behavior ( pg. 8 ).
4. Press the [Done] soft key to return to the Ready Screen.
Removing the quick calibration button from the Ready Screen prevents operators from changing the calibration
without a password.
Disable Quick Calibration
Units
To change the displayed units:
1. Access the Options menu ( pg. 14 ) and press repeatedly until the
Units screen is displayed.
2. Press the [ ↓ ] soft key to toggle between inches and metric.
• To display in units of degrees (°) for the miter controller, set units to metric and change the millimeter conversion
setting ( pg. 18 ).
3. Press the [Done] soft key to return to the Ready Screen.
TIK (Tool Interconnect Kit)
The TigerStop Menu
Jog Reverse