TigerStop TigerSaw Miter, Руководство пользователя

Страница: 15 / 52

9
Controller Display
Soft Keys
Home Routine
After initializing, each controller will read, “Clear the Deck. Press START to run the Home Routine” .
The top line on the controller display always contains information about the current status
of the electronics.
The buttons underneath the display ( , , , and ) are known as soft keys.
The soft keys have different functions at different times. The current functions of each soft key are indicated by soft key prompts
on the bottom line of the display.
Drive Indicator
H
Holding Still
W
Waiting
A
Accelerating
X
Drive Disabled
C
Constant Speed
N
Communication Error
D
Decelerating
S
Stopping
L
Lash
J
Jog
The home routine is a reference routine that must be successfully completed before the motor will respond to commands.
• The home routine can also be run at any time from the Setup menu ( pg. 15 ).
During the home routine, the positioner will move slowly to the sensor at the maximum position.
• Positive miter angles point the blade toward the outfeed.
When the home routine is finished, the controller will display the Ready Screen ( pg. 10 ) .
Basic TigerStop Operation
Warning: During the home routine, the machine will move.
Be sure the path is clear to prevent collisions.
• The heartbeat, in the upper left, is a rotating line indicating normal function.
The heartbeat stops during data entry.
• The letter next to the heartbeat is the drive indicator, which shows the motor
status. Use the table below to interpret the drive indicator.
• The name of the displayed screen is shown in the upper right.