TigerStop TigerSaw Miter, Руководство пользователя

Страница: 16 / 52

10
The Ready Screen (above) is the starting point for all TigerStop functions.
The Ready Screen can always be reached by repeatedly pressing
STOP
or .
The Ready Screen has two forms (above). From the basic Ready Screen (left), press the [Show] soft key to display the
expanded options (right). Press to return to the basic Ready Screen.
Line 2 of the Ready Screen shows the current position.
• The position on the controller for the linear positioner can be set to display units
of inches (in) or millimeters (mm) ( pg. 19 ).
• The position on the miter controller will display the angle in degrees (°).
Line 3 of the Ready Screen is the target position for the next movement. User input will
also appear in line 3.
38.875 inches is 987.4 mm.
Manual Movement
Manual movements are initiated from the Ready Screen.
Enter the target position and press to begin moving.
• If the target position is a whole number, there is no need to enter the decimal.
• If the target position is negative, it must be entered using calculator mode ( pg. 11 ).
• If units are set to inches, then it is also possible to enter the target position as a fraction. Enter the number of whole
inches, the button, and then the fraction.
• Positive miter angles point the blade toward the outfeed.
Ready Screen
Basic TigerStop Operation