IP Phone 202 User Manual
Show “ -- rESEt --”,
ATTENTION:
A> Enter MAC address and press MENU
，
IPPH 202 will restart
and get back to all default setting.
All former configuration will be lost.
B> Press MENU and the phone will restart.
Others
When in the mode:
• Press‘+’ or ‘-’ and show“ ring [4] ”, press ‘+’ or ‘-’ to adjust the
ring volume form 0 to 7
• Press “SPEAKER” , or pick up handset, then press ‘+’ or ‘-’ to
adjust voice volume.
7. TEST YOUR SETUP
If connection is successful, you can begin using your VoIP phone. Your VoIP service provider
will provide you with calling instructions. Due to varying dialing schemes of each provider,
we do not have specific dialing to recommend.
8. TECHNICAL SUPPORT CONTACTS
Email:
Caution: Changes or modifications to this product not expressly approved by Tiger
NetCom, or operation of this product in any way other than as detailed by this User
Manual, could void your manufacturer warranty.
Information in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose without the express written permission of Tiger NetCom.
Copyright © 2003 Tiger NetCom Corporation
Page 21 of 21
