IP Phone 202 User Manual
The IPPH 202 will then display the following screen to confirm that the changes have been
saved.
Please wait 5 seconds and then reboot the device.
6.3.5 Rebooting the IPPH 202
You can reboot the IPPH 202 by clicking on the “Reboot” button after each update to the
configuration page. Alternatively, you can reboot by unplugging the power supply of the
IPPH 202 and then powering it on again. If your IPPH 202 ever becomes “stuck” or
un-responsive, you can unplug the power supply to reboot it. Frequent rebooting by
unplugging the power supply is not recommended and should not be necessary.
6.4 Programming Using Keypad
Copyright © 2003 Tiger NetCom Corporation
Page 18 of 21