Tiger TigerFlex Shiplap Apex Скачать руководство пользователя

Страница: 18 / 20

TIGERFLEX

SHIPLAP PENT GENERAL ASSEMBLY GUIDE

tigersheds.com

0113 205 4189

[email protected]

Step 8:

BARGE BOARD INSTALLATION

•  Fit Barge Boards to the roof, trapping
  overhanging end of the felt in between to
  create a weatherproof seal

• Secure together using 2x 40mm

(N40)

nails

per Barge Board.

• Fit rear sofit boards, these may need
to be trimmed.

• Secure together using 2x 40mm

(N40)

nails

per Sofit Board.

(Detail W)

Step 9:

COVER LAT & CORNER STRIP INSTALLATION

• Fit Corner Strips in the corners of the shed, these are plain profiled pieces.

• Secure to the shed using 3x 40mm

(N40)

nails per Corner Strip.

(Detail X)

• Cut extra supplied piece to length to cover
corners on high side.

• Fit Cover Lats over joints where 2 panels butt
against each other. These are grooved both
sides.

• Secure to the shed using 3x 40mm

(N40)

nails

per Cover Lat.

(Detail Y)

•  Cut extra supplied piece to length to cover
  joins on high side. 2x3w, 3x3w, 4x3w
  & 4x4w Models are not supplied with
  Cover Lats.

• Once finished, seal the windows.

(Windows must be sealed as part of the guarantee).

NOTE - Not required on windowless
shed options.

N40

Содержание TigerFlex Shiplap Apex





















Результаты поиска

Содержание TigerFlex Shiplap Apex

Отзывы:

Похожие инструкции для TigerFlex Shiplap Apex

Бренды по названию

Популярные бренды

Tiger TigerFlex Shiplap Apex, Общие инструкции по сборке

Результаты поиска

Содержание TigerFlex Shiplap Apex

Отзывы:

Похожие инструкции для TigerFlex Shiplap Apex

Бренды по названию

Популярные бренды