background image

Thank you for purchasing a TIGER Stainless Steel Mug.
Please read the instructions completely before use.
Keep these instructions for future reference.

MMQ-S

MODEL

Instructions

Stainless Steel Mug

Safety Precautions

Safety Precautions

Do not use chlorine-based 

bleaches or cleaner when 

cleaning the product.

Do not neglect the product in 

the bag.

Do not remove the protective 

sheet on the underside of the 

product.

Do not attempt to add 

beverage when the stopper is 

still attached on the product.

Be sure to remove the stopper 

before adding the beverage.

Keep the product upright 
position all the time.

Be sure to wipe off remaining 

beverage on the spout.

Important! 

Keep out of reach of children.

Be sure to set the stopper in 

proper position.

Do not fill the product above the 

maximum level shown below.

Do not store milk, dairy 

products, or certain fruit juices 

in the product. 

Do not place the product near 

stoves, open flames, or other 

sources of extreme heat.

Do not use the product for any 

purposes other than keeping 

beverages warm or cold and 

drinking.

Do not knock over, drop or 

expose the product to 

excessive shocks.

Do not disassemble or 

attempt to repair the product 

by yourself.

Do not heat the product in a 

microwave oven.

Do not put dry ice or 

carbonated beverages in the 

product. 

Be sure to clean the product 

immediately, especially for 

sports drinks.

Do not store soups or 

beverages containing salt in 

the product.

·

Consume beverage within the 

day to prevent from spoiling.

Drink slowly when the product 

contains hot beverage.

Noncompliance to this 

instruction may result in scald 

or injury.

Do not open the lid when it 

tilted or near face.

How to Clean

How to Clean

Clean after every use.
Use mild kitchen detergent.
Use a sponge or soft cloth.
Be sure to clean the stopper, spout and gaskets after every use.

Be sure to wipe off with dry cloth. 
Do not use dish washer, dryer or scalder.  

Specifications

Replacing and Purchasing 

Consumable Parts

Before contact Tiger Customer

Service

The stopper, spout and gaskets are 

consumable parts. Check once a year for 

damage/deterioration. If heavily stained or 

loose, replace them.

For replacement parts, contact customer 

service.

The utmost measures have been taken to 

ensure the quality of this product. Should 

the product be defective, however, contact 

Tiger Customer Service and provide the 

following information.

1. Product name

2. Model Number

3. Description of trouble

   (As detailed as possible)

4. Purchase date
Feel free to send any questions or 

comments about this product.

For the purpose of performance improvement, designs, specifications and parts shown in this 
publication are subject to change without notice.

1

2

3

MMQ-S

Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C

203°F±2°F and 

leaving it in a room temperature of 20°C±2°C

68°F±4°F for 1hour or 6hours.

Cold retention has been calculated under the condition of adding cold water at 4°C±1°C

39°F±2°F and 

leaving it in a room temperature of 20°C±2°C

68°F±4°F for 6hours.

Capacity is actual volume that water can be stored into the product when the stopper is closed.   

TIGER HANBAI (H.K.) CO.,LTD.

Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road, 
Kwai Chung, N.T.
Tel: (852) 2418-0912  Fax: (852) 2418-0911

JAPAN TIGER CORPORATION OF U.S.A.

2730 Monterey Street, Suite 105 Torrance, CA 90503
Tel: (310) 787-1985 

Fax: (310) 787-1986

URL: http://www.japantigercorp.com/

TIGER CORPORATION

Head Office: 3-1 Hayamicho, Kadoma City, Osaka 571-8571, Japan
URL : http://www.tiger.jp/global.html

Tips

Tips

Capacity

Heat retention

Cold retention

0.35 liters / 11.8 oz

Greater than 83°C •

181°F (1hour)

Less than 9°C • 48°F (6hours)

Greater than 61°C •

142°F (6hours)

0.5 liters / 16.9 oz

Greater than 85°C •

185°F (1hour)

Less than 8°C • 46°F (6hours)

Greater than 71°C •

160°F (6hours)

How to Clean

How to Clean

Maximum 

level

Approx.

1cm 1/2-inch

Beverage

When removing the spout and gaskets, refer to the illustrations.

Body

Protective sheet

Stopper gasket

Stopper gasket top

Lid gasket

Spout

Stopper

Button

To keep your beverage warm or cool longer, pour hot (or cold) 
water into the product, and let it sit for one or two minutes to 
allow the inside of the product to heat (or cool). 

The product rattles when shaken.

This is caused by a metal sheet moving inside the product and it doesn't affect the performance 
of the product. The metal sheet is used for boosting the performance of heat retention. 

Attaching and Removing the spout and gaskets

Be sure to set the spout and the gaskets in proper position.

Lid gasket

Lid

Lid gasket

Spout

Spout

Stopper

Stopper gasket top and stopper gasket

Stopper gasket top

Stopper gasket

Convex

Safety lock

Lid

Button

Unlock

Press

Spout

Отзывы: