TRANSF
Transfer the present call to another number
CONF
Conference call for three sides
FLASH
Used to switch between two lines
MUTE/DEL
Delete the call history, voice message, etc.
REDIAL
Dial the last called number
SPEAKER
Enter the hand-free mode
Memory Key M1-
M10
Under Development
5.2 Dialing or Making Calls
5.2.1 Two dialing modes:
Ordinary dialing mode (4 ways):
1.
Pick the up handset or press the “SPEAKER” button.
2.
Press the REDIAL button to dial the Dial the last called number.
3.
View the CALLED history and choose to redial.
4.
View the CALLER history and choose to redial.
IP address dialing mode:
1.
Press “MENU” button to view the local IP address.
2.
Dial the IP address and press “#” to start calling
5.2.2 Call Hold
While in conversation, pressing the “Hold” button will put the remote end on hold.
Pressing the “Hold” button again will release the previously Hold state and the bidirectional media
will resume.
5.2.3 Call Flash
Assuming that call party A and party B are in conversation. Party A wants to speak to party C or if
there is another incoming call:
1. Party A presses FLASH to get a dial tone.
2. Party A then dials party C’s number then #. Party A and party C now are in conversation.
3. By pressing FLASH button, Party A can choose to have conversation with B or C.
5.2.4 Call Transfer
5.2.4.1 Blind Transfer
The user can transfer an active call to a third party without announcement.
Assuming that call party A and party B are in conversation. Party A wants to transfer party B to
party C:
1. Party A presses TRANSF to get a dial tone.
2. Party A then dials party C’s number then #.
3. Party A then press REDIAL. A quick confirmation tone if the transfer has been successful.
Party B and party C now are in conversation.
