Tiger IPPH 202, Руководство пользователя

Страница: 12 / 18

Other Settings
Options Meaning
Firmware
Upgrade via
TFTP server
The IP of TFTP server needs to be configured. If it is non-zero or not blank, the IP phone will
attempt to retrieve new configuration file or new code image from the specified tftp server at boot
time. It will make up to 3 attempts before timeout and then it will start the boot process using the
existing code image in the Flash memory. If a tftp server is configured and a new code image is
retrieved, the new downloaded image will be verified and then saved into the Flash memory. Be
careful when the TFTP is in progress (the phone back light on LCD screen will be up). Do NOT
interrupt the process (especially the power supply) otherwise might cause the device dead. Be
patient as in some network this process will take up to 15 minutes.
Firmware
Upgrade via
HTTP server The URL for the HTTP server used for firmware upgrade and configuration via HTTP. For
example, http://upgrade.myVoIPservice.com:6688/IPPH202 Here “:6688” is the specific TCP port
that the HTTP server is listening to, it can be omitted if using default port 80. Note: Auto Upgrade
has to be set to “Yes” to enable HTTP upgrade.
Auto Upgrade
Choose Yes to enable HTTP upgrade and provisioning. In “Check for new firmware every ___
days” field, enter the number of days to check the HTTP server for firmware upgrade or
configuration.
NTP Server
This parameter defines the URI or IP address of the NTP server which the IP phone will use to
synchronize the current date/time.
SUBSCRIBE
for MWI Default is “No”. When set to “Yes” a SUBSCRIBE for Message Waiting Indication will be sent
periodically.
FXS Impedance Selects the impedance of the analog telephone connected to the Phone port.
Lock Keypad
Update
If this parameter is set to “Yes”, the configuration update via keypad is disabled.
Debug
Server Address
This parameter defines the URI or IP address of the Debug server.
Debug Level Default is “None”. Choose the debug level you want when using this function.
Super Password
Default is “ Admin ”. This contains the password to access the Advanced Web Configuration page.
This field is case sensitive.
Network Settings